-
Suspended System Accessories
Butterfly knot wire rod is a very commonly used to ceiling grid accessories, composed of two wires and a clip, it is simple construction and stable installation. Wire can be long or short, and freely adjusted. During the construction process, the height of the barbed wire can be adjusted according to the construction requirements. -
Lay-In Fine Fissured Ceiling Suspended System White Ceiling Grid
The installation of the ceiling t grid is simple and generous, and it can be used with mineral fiber ceiling board or pvc gypsum board.
The raw material is galvanized steel strip, which is not easy to rust, not easy to bend, and has high bearing strength. -
Suspended System Black Ceiling Grid
Ceiling grid is a kind of keel used with the ceiling tiles, which plays a fixed role. The ceiling grid is divided into main tee, long cross tee, short cross tee and wall angle. The middle one is 3.6 meters long, the middle one is 1.2 meters long, the minor one is 0.6 meters long, and the corner one is 3 meters long. -
Suspended System FUT Ceiling Grid
There are also many kinds of ceiling t grid, including flat ceiling t grid, through ceiling t grid, and three-dimensional ceiling t grid. We can match the suitable ceiling grid according to the shape of the edge of the board.
32x24x3600x0.3mm
26x24x1200x0.3mm
26x24x600x0.3mm
22x22x3000x0.3mm -
Suspended System Ceiling Grid Accessories
Ceiling grid accessories includes anchors, screws, rods, nuts, adjusting rod, ect.
Accessories are always installed with ceiling tile and ceiling grid. These are necessary.
We can supply all these small screws, rods, nuts, etc. to help you finish an excellent project. -
Suspended System Black Groove Ceiling Grid
The raw material of the paint keel is galvanized steel strip, which has good pressure bearing capacity, rust-proof, and can be as new for a long time. It has a long service life and is not easy to deform.
32x24x3600x0.3mm
26x24x1200x0.3mm
26x24x600x0.3mm
22x22x3000x0.3mm
